Knauf Earthwool Loft Roll 44 Combi-Cut Insulation 12180x1140x100mm (13.89m2)
This product is currently only available in our local delivery area: AL1, AL10, AL2, AL3, AL4, AL5, AL6, AL7, AL8, AL9, CM19, EN1, EN10, EN11, EN2, EN3, EN4, EN5, EN6, EN7, EN8, EN9, HA3, HA7, HA8, HP1, HP2, HP3, HP4, LU1, LU2, N10, N11, N12, N13, N14, N18, N2, N20, N21, N22, N3, N4, N9, NW4, NW7, NW9, SG10, SG11, SG12, SG13, SG14, SG2, SG3, SG4, SG9, WD1, WD17, WD18, WD19, WD2, WD23, WD24, WD25, WD4, WD5, WD6, WD7Availability -IN STOCK. If you are purchasing for a large project, please call to check availability. This product will normally be delivered by courier anywhere in the UK. All orders will be ready for collection within 3 hours, before coming please call. Collection postcode: Welham Green, Hatfield: AL9 7HF
For pitched roofs at ceiling level and suspended timber floors.
Earthwool Loft Roll 44 has a thermal conductivity of 0.044W/mK.
Earthwool Loft Roll 44 is classified as Euroclass A1 to BS EN 13501-1.
Earthwool Loft Roll 44 insulation is a flexible low density glass mineral wool quilt which is lightweight, resilient and non-combustible. The rolls are 1140mm wide and partially perforated to produce either 2 rolls 570mm wide or 3 rolls 380mm wide or available in ready-cut version (2x570mm only).
- Lightweight and economic insulation quilt
- Produced for use with timber joists at 400mm and 600mm centres
- Partially cut perforations
- Provides thermal, acoustic and fire performance
Earthwool Loft Roll 44 is primarily used for the thermal insulation of pitched roofs at ceiling level, it can also be used to thermally insulate floors. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists.
|Manufacturer's Part Number||2404154|
|Type||Glass Mineral Wool|