Quinn Therm PIR Insulation Board 2400mm x 1200mm x 50mm
Quinn Therm PIR Insulation is a high performance, fibre free board, with a rigid thermoset insulation core and faced on both sides with a low emissivity composite foil facing.
The high compressive strength of Quinn Therm QF enables it to withstand the dead and imposed loads transmitted through the floor.
Quinn Therm PIR is suitable for new build and refurbishments projects in both domestic and commercial build. With specific properties that optimise the performance of underfloor heating.
For suspended timber floors in particular, Quinn Therm PIR reduces heat loss by an air infiltration method, making it the ideal solution for upgrading the thermal performance of existing floors.
These low emissivity facings increases its thermal resistance of unventilated air space adjacent to the insulation, improving the roof's overall thermal performance.
Designed for warm pitched or ventilated cold flat roof constructions on new build projects or on refurbishment projects where the roof is to be stripped and re-covered.
The low emissivity foil facings increase the thermal resistance an unventilated cavity adjacent to the insulation, reducing the overall U-value of the wall.
The good dimensional tolerances of the Quinn Therm PIR Insulation board enable it to be tightly butted to form a continuous layer of insulation. Joints can then be easily taped with an aluminium foil tape to provide an effective vapour control layer.
- Certified under BBA certificate number 07/4444
- Zero ozone depletion potential (zero ODP) and low global warming potential (GWP)
- Achieves an A+ rating when compared to the BRE Green Guide
|Manufacturer's Part Number||PY18049|