Kay-Cel EPS 70 Expanded Polystyrene Board 2400 x 1200 x 50mm
This product is currently only available in our local delivery area: AL1, AL10, AL2, AL3, AL4, AL5, AL6, AL7, AL8, AL9, CM19, EN1, EN10, EN11, EN2, EN3, EN4, EN5, EN6, EN7, EN8, EN9, HA3, HA7, HA8, HP1, HP2, HP3, HP4, LU1, LU2, N10, N11, N12, N13, N14, N18, N2, N20, N21, N22, N3, N4, N9, NW4, NW7, NW9, SG10, SG11, SG12, SG13, SG14, SG2, SG3, SG4, SG9, WD1, WD17, WD18, WD19, WD2, WD23, WD24, WD25, WD4, WD5, WD6, WD7
For pitched roofs at ceiling level and suspended timber floors.
Earthwool Loft Roll 44 has a thermal conductivity of 0.044W/mK.
Earthwool Loft Roll 44 is classified as Euroclass A1 to BS EN 13501-1.
Earthwool Loft Roll 44 insulation is a flexible low density glass mineral wool quilt which is lightweight, resilient and non-combustible. The rolls are 1140mm wide and partially perforated to produce either 2 rolls 570mm wide or 3 rolls 380mm wide or available in ready-cut version (2x570mm only).
- Lightweight and economic insulation quilt
- Produced for use with timber joists at 400mm and 600mm centres
- Partially cut perforations
- Provides thermal, acoustic and fire performance
Earthwool Loft Roll 44 is primarily used for the thermal insulation of pitched roofs at ceiling level, it can also be used to thermally insulate floors. When used at ceiling level it is usually laid in two layers, with the first layer between the joists and the second layer over, and at right angles to the joists.